Product specifications
WHAT THIS PRODUCT DOES
The TP-Link 5-Port 10/100Mbps desktop switch TL-SG1005D provides you an easy way to make the transition to 10/100Mbps Ethernet. Increase the speed of your network server and backbone connections, or make 10/100Mbps to the desktop a reality. Moreover, TL-SG1005D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1005D can save up to 80%* of the power consumption, making it an eco-friendly solution for your home or office network.
GO GREEN WITH YOUR ETHERNET
You now have the choice to go green when upgrading to a 10/100Mbps network! This new generation TL-SG1005D 5-Port 10/100Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1005D can automatically detect the link status of each port and reduce the power consumption of ports that are idle, resulting in up to an 70% reduction in power use.
Power Budget According to Cable Length
Ideally, shorter cables would use less power because of less power degradation over their length, this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG1005D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution, saving up to 40% of power that would otherwise be wasted.
Easy to Use
The auto features of this 10/100Mbps switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
* Maximum power savings when compared to a TP-LINK conventional switch, the real saving rate may vary based on the usage condition.
Features
> Innovative energy-efficient technology saves power up to 80%
> Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
> Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
> 16Gbps Switching Capacity
> 9K Jumbo frame improves performance of large data transfers
> Auto-MDI/MDIX eliminates the need for crossover cables
> Supports MAC address auto-learning and auto-aging
> Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware.
> Fanless design ensures quiet operation
> Desktop or wall-mounting design
> Plug and Play design simplifies installation
The TP-Link 5-Port 10/100Mbps desktop switch TL-SG1005D provides you an easy way to make the transition to 10/100Mbps Ethernet. Increase the speed of your network server and backbone connections, or make 10/100Mbps to the desktop a reality. Moreover, TL-SG1005D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1005D can save up to 80%* of the power consumption, making it an eco-friendly solution for your home or office network.
GO GREEN WITH YOUR ETHERNET
You now have the choice to go green when upgrading to a 10/100Mbps network! This new generation TL-SG1005D 5-Port 10/100Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1005D can automatically detect the link status of each port and reduce the power consumption of ports that are idle, resulting in up to an 70% reduction in power use.
Power Budget According to Cable Length
Ideally, shorter cables would use less power because of less power degradation over their length, this is not the case with most devices as they will use the same amount of power across the cable regardless of whether it is 10 or 50 meters in length. The TL-SG1005D analyzes the length of the Ethernet cable connected and adjusts the power usage accordingly, rather than keeping the power consumption in a conventional solution, saving up to 40% of power that would otherwise be wasted.
Easy to Use
The auto features of this 10/100Mbps switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.
* Maximum power savings when compared to a TP-LINK conventional switch, the real saving rate may vary based on the usage condition.
Features
> Innovative energy-efficient technology saves power up to 80%
> Supports IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
> Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
> 16Gbps Switching Capacity
> 9K Jumbo frame improves performance of large data transfers
> Auto-MDI/MDIX eliminates the need for crossover cables
> Supports MAC address auto-learning and auto-aging
> Auto-negotiation ports provide smart integration between 10Mbps, 100Mbps and 1000Mbps hardware.
> Fanless design ensures quiet operation
> Desktop or wall-mounting design
> Plug and Play design simplifies installation
| Ports & interfaces | |
|---|---|
| Copper ethernet cabling technology | 10GBASE-T |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Power connector | DC-in jack |
| Virtual LAN features | |
| VLAN mapping type | 2:2 VLAN Mapping |
| Virtual LAN features | IP subnet“based VLAN |
| Performance | |
| Stackable | No |
| Harmonized System (HS) code | 85176990 |
| Power | |
| Power connector | DC-in jack |
| Power consumption (max) | 1.48 W |
| Technical details | |
| Stackable | No |
| Housing material | Copper |
| Rack mounting | No |
| Management features | |
| Switch type | Unmanaged |
| Network | |
| Copper ethernet cabling technology | 10GBASE-T |
| Networking standards | IEEE 802.11i |
| Full duplex | Yes |
| Flow control support | Yes |
| Ethernet LAN data rates | 5000 Mbit/s |
| 10G support | No |
| VLAN mapping type | 2:2 VLAN Mapping |
| Virtual LAN features | IP subnet“based VLAN |
| Data transmission | |
| MAC address table | 1000 entries |
| Switching capacity | 1 Gbit/s |
| Store-and-forward | Yes |
| Security | |
| Authentication | Auto VLAN |
| Security algorithms | HTTPS |
| Queue scheduling algorithms | SP |
| Authentication type | HWTACACS |
| DHCP features | DHCP server |
| Multicast features | |
| Multicast features | Controllable multicast |
| Protocols | |
| Supported network protocols | CSMA/CD, TCP/IP |
| Design | |
| Stackable | No |
| Housing material | Copper |
| Rack mounting | No |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | No |
| Operational conditions | |
| Storage temperature (T-T) | -40 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Heat dissipation | 6.38 BTU/h |
| Weight & dimensions | |
| Width | 103.5 mm |
| Depth | 70 mm |
| Height | 22 mm |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Other features | |
| Ethernet LAN data rates | 5000 Mbit/s |
Accessories
Reviews
...
Shipping & Return
Shipping Policy Overview:
This policy delineates the guidelines for shipping and returns when sending goods through mail. These guidelines encompass details such as costs, delivery times, and procedures to follow in case of product damage upon arrival.
When do we ship?
To provide clarity on anticipated delivery dates for GIGATE shipments, we have included the expected delivery date beneath each product. Moreover, our customer service team reaches out within 24 working hours of purchase to review orders and confirm delivery dates.
Where do we ship to?
GIGATE dispatches products from six warehouses in distinct regions to streamline shipping and minimize delivery times. We employ professional carriers and logistics systems to cover all cities in Saudi Arabia, ensuring efficient tracking of shipments.
How do we ship?
While most orders are shipped via selected professional couriers (DHL,OTO, SMSA) ,the shipping company is chosen by the GIGATE operation team based on product type, warehouse location, and customer destination address. Customers can provide special instructions in the comments box or inform GIGATE customer service during their address verification call.
Shipping Rates:
GIGATE offers Free Shipping on all products, excluding special items that incur additional shipping costs.
Order Tracking:
GIGATE provides a dedicated page for customers to easily track their shipments and monitor order statuses. Tracking can be done using the order ID and email address received upon order placement or the carrier tracking number.
Stock Availability:
While items are typically in stock, occasional shortages may occur due to sudden demand. In such cases, customers are promptly notified, and GIGATE customer service communicates the expected delivery time. Customers dissatisfied with the revised delivery time may opt for a refund within 2 hours.
VAT, Customs, and Duties:
All costs, including shipping, VAT, customs, and duties, are transparently included in the paid price. GIGATE ensures customers are informed of the total cost before purchase through a prominently displayed notification.
Shipping Damages:
GIGATE prioritizes secure packing and selects professional carriers to minimize the risk of damage during shipment. In the rare event of damages, customers must inform the customer service or support team within 24 hours of delivery for prompt resolution.
Return Shipment:
For return procedures, please refer to our Return and Refund Policy. If a return is unrelated to technical issues or product specifications and is solely due to a change of mind, return costs are the responsibility of the customer. Customers can coordinate returns with the customer care team or support team for seamless processing.
